Circular permutation in proteins
Public peer review comments can be seen here
- 1 History
- 2 Evolution
- 3 The Role of Circular Permutations in Protein Engineering
- 4 Algorithmic Detection of Circular Permutations
- 5 Acknowledgments
- 6 Further Reading
- 7 References
Public peer review comments will be posted here
Circular permutation describes a type of relationship between proteins, whereby the proteins have a changed order of amino acids in their protein sequence, such that the sequence of the first portion of one protein (adjacent to the N-terminus) is related to that of the second portion of the other protein (near its C-terminus), and vice versa (see figure 1). This is directly analogous to the mathematical notion of a cyclic permutation over the set of residues in a protein.
Circular permutation can be the result of evolutionary events, post-translational modifications, or artificially engineered mutations. The result is a protein structure with different connectivity, but overall similar three-dimensional (3D) shape. The homology between portions of the proteins can be established by observing similar sequences between N- and C-terminal portions of the two proteins, structural similarity, or other methods.
In 1979, Bruce Cunningham and his colleagues discovered the first instance of a circularly permuted protein in nature. After determining the peptide sequence of the lectin protein favin, they noticed its similarity to a known protein - concanavalin A - except that the ends were circularly permuted (see figure 2). Later work confirmed the circular permutation between the pair and showed that concanavalin A is permuted post-translationally through cleavage and an unusual protein ligation.
After the discovery of a natural circularly permuted protein, researchers looked for a way to emulate this process. In 1983, David Goldenberg and Thomas Creighton were able to create a circularly permuted version of a protein by chemically ligating the termini to create a cyclic protein, then introducing new termini elsewhere using trypsin. In 1989, Karolin Luger and her colleagues introduced a genetic method for making circular permutations by carefully fragmenting and ligating DNA. This method allowed for permutations to be introduced at arbitrary sites, and is still used today to design circularly permuted proteins in the lab.
Despite the early discovery of post-translational circular permutations and the suggestion of a possible genetic mechanism for evolving circular permutants, it was not until 1995 that the first circularly permuted pair of genes were discovered. Saposins are a class of proteins involved in sphingolipid catabolism and lipid antigen presentation in humans. Christopher Ponting and Robert Russell identified a circularly permuted version of a saposin inserted into plant aspartic proteinase, which they nicknamed swaposin. Saposin and swaposin were the first known case of two natural genes related by a circular permutation.
Hundreds of examples of protein pairs related by a circular permutation were subsequently discovered in nature or produced in the laboratory. The Circular Permutation Database contains 2,238 circularly permuted protein pairs with known structures, and many more are known without structures. The CyBase database collects proteins that are cyclic, some of which are permuted variants of cyclic wild-type proteins. SISYPHUS is a database that contains a collection of hand-curated manual alignments of proteins with non-trivial relationships, several of which have circular permutations.
There are two main models that are currently being used to explain the evolution of circularly permuted proteins: permutation by duplication and fission and fusion. The two models have compelling examples supporting them, but the relative contribution of each model in evolution is still under debate. Other, less common, mechanisms have been proposed, such as "cut and paste" or "exon shuffling".
Permutation by Duplication
The earliest model proposed for the evolution of circular permutations is the permutation by duplication mechanism. In this model, a precursor gene first undergoes a duplication and fusion to form a large tandem repeat. Next, start and stop codons are introduced at corresponding locations in the duplicated gene, removing redundant sections of the protein (see figure 3).
One surprising prediction of the permutation by duplication mechanism is that intermediate permutations can occur. For instance, the duplicated version of the protein should still be functional, since otherwise evolution would quickly select against such proteins. Likewise, partially duplicated intermediates where only one terminus was truncated should be functional. Such intermediates have been extensively documented in protein families such as DNA methyltransferases.
Saposin and Swaposin
An example for permutation by duplication is the relationship between saposin and swaposin. Saposins are highly conserved glycoproteins that consist of an approximately 80 amino acid residue long protein forming a four alpha helical structure. They have a nearly identical placement of cysteine residues and glycosylation sites. The cDNA sequence that codes for saposin is called prosaposin. It is a precursor for four cleavage products, the saposins A, B, C, and D. The four saposin domains most likely arose from two tandem duplications of an ancestral gene. This repeat suggests a mechanism for the evolution of the relationship with the plant-specific insert (PSI) (see figure 4). The PSI is a domain exclusively found in plants, consisting of approximately 100 residues and found in plant aspartic proteases. It belongs to the saposin-like protein family (SAPLIP) and has the N- and C- termini "swapped", such that the order of helices is 3-4-1-2 compared with saposin, thus leading to the name "swaposin". For a review on functional and structural features of saposin-like proteins, see Bruhn (2005).
Fission and Fusion
Another model for the evolution of circular permutations is the fission and fusion model. The process starts with two partial proteins. These may represent two independent polypeptides (such as two parts of a heterodimer), or may have originally been halves of a single protein that underwent a fission event to become two polypeptides (see figure 5).
The two proteins can later fuse together to form a single polypeptide. Regardless of which protein comes first, this fusion protein may show similar function. Thus, if a fusion between two proteins occurs twice in evolution (either between paralogues within the same species or between orthologues in different species) but in a different order, the resulting fusion proteins will be related by a circular permutation.
Evidence for a particular protein having evolved by a fission and fusion mechanism can be provided by observing the halves of the permutation as independent polypeptides in related species, or by demonstrating experimentally that the two halves can function as separate polypeptides.
An example for the fission and fusion mechanism can be found in nicotinamide nucleotide transhydrogenases. These are membrane-bound enzymes that catalyze the transfer of a hydride ion between NAD(H) and NADP(H) in a reaction that is coupled to transmembrane proton translocation. They consist of three major functional units (I, II, and III) that can be found in different arrangement in bacteria, protozoa, and higher eukaryotes (see figure 6). Phylogenetic analysis suggests that the three groups of domain arrangements were acquired and fused independently.
Other Processes that can Lead to Circular Permutations
The two evolutionary models mentioned above describe ways in which genes may be circularly permuted, resulting in a circularly permuted mRNA after transcription. Proteins can also be circularly permuted via post-translational modification, without permuting the underlying gene. Circular permutations can happen spontaneously through auto-catalysis, as in the case of concanavalin A (see figure 2). Alternately, permutation may require restriction enzymes and ligases.
The Role of Circular Permutations in Protein Engineering
Many proteins have their termini located close together in 3D space. Because of this, it is often possible to design circular permutations of proteins. Today, circular permutations are generated routinely in the lab using standard genetics techniques. Although some permutation sites prevent the protein from folding correctly, many permutants have been created with nearly identical structure and function to the original protein.
The motivation for creating a circular permutant of a protein can vary. Scientists may want to improve some property of the protein, such as
- Reduce proteolytic susceptibility. The rate at which proteins are broken down can have a large impact on their activity in cells. Since termini are often accessible to proteases, designing a circularly permuted protein with less accessible termini can increase the lifespan of that protein in the cell.
- Improve catalytic activity. Circularly permuting a protein can sometimes increase the rate at which it catalyzes a chemical reaction, leading to more efficient proteins.
- Alter substrate or ligand binding. Circularly permuting a protein can result in the loss of substrate binding, but can occasionally lead to novel ligand binding activity or altered substrate specificity.
- Improve thermostability. Making proteins active over a wider range of temperatures and conditions can improve their utility.
Alternately, scientists may be interested in properties of the original protein, such as
- Fold order. Determining the order in which different parts of a protein fold is challenging due to the extremely fast time scales involved. Circularly permuted versions of proteins will often fold in a different order, providing information about the folding of the original protein.
- Essential structural elements. Artificial circularly permuted proteins can allow parts of a protein to be selectively deleted. This gives insight into which structural elements are essential or not.
- Modify quaternary structure. Circularly permuted proteins have been shown to take on different quaternary structure than wild-type proteins.
- Find insertion sites for other proteins. Inserting one protein as a domain into another protein can be useful. For instance, inserting calmodulin into green fluorescent protein (GFP) allowed researchers to measure the activity of calmodulin via the florescence of the split-GFP. Regions of GFP that tolerate the introduction of circular permutation are more likely to accept the addition of another protein while retaining the function of both proteins.
- Design of novel biocatalysts and biosensors. Introducing circular permutations can be used to design proteins to catalyze specific chemical reactions, or to detect the presence of certain molecules using proteins. For instance, the GFP-calmodulin fusion described above can be used to detect the level of calcium ions in a sample.
Algorithmic Detection of Circular Permutations
Many sequence alignment and protein structure alignment algorithms have been developed assuming linear data representations and as such are not able to detect circular permutations between proteins. Two examples of frequently used methods that have problems correctly aligning proteins related by circular permutation are dynamic programming and many hidden Markov models. As an alternative to these, a number of algorithms are built on top of non-linear approaches and are able to detect topology-independent similarities, or employ modifications allowing them to circumvent the limitations of dynamic programming. The table below is a collection of such methods.
The algorithms are classified according to the type of input they require. Sequence-based algorithms require only the sequence of two proteins in order to create an alignment. Sequence methods are generally fast and suitable for searching whole genomes for circularly permuted pairs of proteins. Structure-based methods require 3D structures of both proteins being considered. They are often slower than sequence-based methods, but are able to detect circular permutations between distantly related proteins with low sequence similarity. Some structural methods are topology independent, meaning that they are also able to detect more complex rearrangements than circular permutation.
|FBPLOT||Sequence||Draws dot plots of suboptimal sequence alignments||Zuker||1991|||
|Bachar et al||Structure, topology independent||Uses geometric hashing for the topology independent comparison of proteins||Bachar et al.||1993|||
|Uliel at al||Sequence||First suggestion of how a sequence comparison algorithm for the detection of circular permutations can work||Uliel et al.||1999|||
|SHEBA||Structure||Duplicates a sequence in the middle; uses SHEBA algorithm for structure alignment; determines new cut position after structure alignment||Jung & Lee||2001|||
|Multiprot||Structure, Topology independent||Calculates a sequence order independent multiple protein structure alignment||Shatsky||2004||server, download|||
|RASPODOM||Sequence||Modified Needleman & Wunsch sequence comparison algorithm||Weiner et al.||2005||server|||
|CPSARST||Structure||Describes protein structures as one-dimensional text strings by using a Ramachandran sequential transformation (RST) algorithm. Detects circular permutations through a duplication of the sequence represention and "double filter-and-refine" strategy.||Lo, Lyu||2008||server|||
|GANGSTA +||Structure||Works in two stages: Stage one identifies coarse alignments based on secondary structure elements. Stage two refines the alignment on residue level and extends into loop regions.||Schmidt-Goenner et al.||2009||server, download|||
|SANA||Structure||Detect initial aligned fragment pairs (AFPs). Build network of possible AFPs. Use random-mate algorithm to connect components to a graph.||Wang et al.||2010||download|||
|CE-CP||Structure||Built on top of the combinatorial extension algorithm. Duplicates atoms before alignment, truncates results after alignment||Bliven et al.||2010||server, download|||
A stub of this article authored primarily by AP was previously published on Wikipedia. The authors built on the version of 00:53, 29 May 2011 and were careful not to include the work of others for licensing reasons and rather provide a complete re-write of the first version. Still, they would like to thank individuals from the Wikipedia community for subsequent contributions to the original stub.
- David Goodsell (2010) Concanavalin A and Circular Permutation Research Collaboratory for Structural Biology (RCSB) Protein Data Bank (PDB) Molecule of the Month April 2010
- Yu and Lutz (2011), for a review of the use of circular permutation in protein design.
- Weiner & Bornberg-Bauer (2006), for a review of evolutionary mechanisms for circular permutations.
- Cyclic permutation
- ^ a b c Cunningham BA, Hemperly JJ, Hopp TP & Edelman GM (1979) Favin versus concanavalin A: Circularly permuted amino acid sequences Proc. Natl. Acad. Sci. U.S.A. 76:3218-22 [PMID: 16592676]
- ^ Einspahr H, Parks EH, Suguna K, Subramanian E & Suddath FL (1986) The crystal structure of pea lectin at 3.0-A resolution J. Biol. Chem. 261:16518-27 [PMID: 3782132]
- ^ Carrington DM, Auffret A & Hanke DE (1985) Polypeptide ligation occurs during post-translational modification of concanavalin A Nature 313:64-7 [PMID: 3965973]
- ^ a b Bowles DJ & Pappin DJ (1988) Traffic and assembly of concanavalin A Trends Biochem. Sci. 13:60-4 [PMID: 3070848]
- ^ a b Goldenberg DP & Creighton TE (1983) Circular and circularly permuted forms of bovine pancreatic trypsin inhibitor J. Mol. Biol. 165:407-13 [PMID: 6188846]
- ^ a b Luger K, Hommel U, Herold M, Hofsteenge J & Kirschner K (1989) Correct folding of circularly permuted variants of a beta alpha barrel enzyme in vivo Science 243:206-10 [PMID: 2643160]
- ^ a b Ponting CP & Russell RB (1995) Swaposins: circular permutations within genes encoding saposin homologues Trends Biochem. Sci. 20:179-80 [PMID: 7610480]
- ^ Circular Permutation Database. http://sarst.life.nthu.edu.tw/cpdb/ Accessed 16 February, 2012.
- ^ Lo WC, Lee CC, Lee CY & Lyu PC (2009) CPDB: a database of circular permutation in proteins Nucleic Acids Res. 37:D328-32 [PMID: 18842637][DOI]
- ^ Kaas Q & Craik DJ (2010) Analysis and classification of circular proteins in CyBase Biopolymers 94:584-91 [PMID: 20564021][DOI]
- ^ Andreeva A, Prlić A, Hubbard TJ & Murzin AG (2007) SISYPHUS--structural alignments for proteins with non-trivial relationships Nucleic Acids Res. 35:D253-9 [PMID: 17068077][DOI]
- ^ a b c Weiner J & Bornberg-Bauer E (2006) Evolution of circular permutations in multidomain proteins Mol. Biol. Evol. 23:734-43 [PMID: 16431849][DOI]
- ^ Bujnicki JM (2002) Sequence permutations in the molecular evolution of DNA methyltransferases BMC Evol. Biol. 2:3 [PMID: 11914127]
- ^ Jeltsch A (1999) Circular permutations in the molecular evolution of DNA methyltransferases J. Mol. Evol. 49:161-4 [PMID: 10368444]
- ^ Ponting CP & Russell RB (1995) Swaposins: circular permutations within genes encoding saposin homologues Trends Biochem. Sci. 20:179-80 [PMID: 7610480]
- ^ Hazkani-Covo E, Altman N, Horowitz M & Graur D (2002) The evolutionary history of prosaposin: two successive tandem-duplication events gave rise to the four saposin domains in vertebrates J. Mol. Evol. 54:30-4 [PMID: 11734895][DOI]
- ^ Guruprasad K, Törmäkangas K, Kervinen J & Blundell TL (1994) Comparative modelling of barley-grain aspartic proteinase: a structural rationale for observed hydrolytic specificity FEBS Lett. 352:131-6 [PMID: 7925961]
- ^ Bruhn H (2005) A short guided tour through functional and structural features of saposin-like proteins Biochem. J. 389:249-57 [PMID: 15992358][DOI]
- ^ Lee J & Blaber M (2011) Experimental support for the evolution of symmetric protein architecture from a simple peptide motif Proc. Natl. Acad. Sci. U.S.A. 108:126-30 [PMID: 21173271][DOI]
- ^ a b Hatefi Y & Yamaguchi M (1996) Nicotinamide nucleotide transhydrogenase: a model for utilization of substrate binding energy for proton translocation FASEB J. 10:444-52 [PMID: 8647343]
- ^ Thornton JM & Sibanda BL (1983) Amino and carboxy-terminal regions in globular proteins J. Mol. Biol. 167:443-60 [PMID: 6864804]
- ^ a b Yu Y & Lutz S (2011) Circular permutation: a different way to engineer enzyme structure and function Trends Biotechnol. 29:18-25 [PMID: 21087800][DOI]
- ^ Whitehead TA, Bergeron LM & Clark DS (2009) Tying up the loose ends: circular permutation decreases the proteolytic susceptibility of recombinant proteins Protein Eng. Des. Sel. 22:607-13 [PMID: 19622546][DOI]
- ^ a b Cheltsov AV, Barber MJ & Ferreira GC (2001) Circular permutation of 5-aminolevulinate synthase. Mapping the polypeptide chain to its function J. Biol. Chem. 276:19141-9 [PMID: 11279050][DOI]
- ^ Qian Z & Lutz S (2005) Improving the catalytic activity of Candida antarctica lipase B by circular permutation J. Am. Chem. Soc. 127:13466-7 [PMID: 16190688][DOI]
- ^ Topell S, Hennecke J & Glockshuber R (1999) Circularly permuted variants of the green fluorescent protein FEBS Lett. 457:283-9 [PMID: 10471794]
- ^ Viguera AR, Serrano L & Wilmanns M (1996) Different folding transition states may result in the same native structure Nat. Struct. Biol. 3:874-80 [PMID: 8836105]
- ^ Capraro DT, Roy M, Onuchic JN & Jennings PA (2008) Backtracking on the folding landscape of the beta-trefoil protein interleukin-1beta? Proc. Natl. Acad. Sci. U.S.A. 105:14844-8 [PMID: 18806223][DOI]
- ^ Zhang P & Schachman HK (1996) In vivo formation of allosteric aspartate transcarbamoylase containing circularly permuted catalytic polypeptide chains: implications for protein folding and assembly Protein Sci. 5:1290-300 [PMID: 8819162][DOI]
- ^ Huang YM, Nayak S & Bystroff C (2011) Quantitative in vivo solubility and reconstitution of truncated circular permutants of green fluorescent protein Protein Sci. 20:1775-80 [PMID: 21910151][DOI]
- ^ Beernink PT, Yang YR, Graf R, King DS, Shah SS & Schachman HK (2001) Random circular permutation leading to chain disruption within and near alpha helices in the catalytic chains of aspartate transcarbamoylase: effects on assembly, stability, and function Protein Sci. 10:528-37 [PMID: 11344321][DOI]
- ^ a b Baird GS, Zacharias DA & Tsien RY (1999) Circular permutation and receptor insertion within green fluorescent proteins Proc. Natl. Acad. Sci. U.S.A. 96:11241-6 [PMID: 10500161]
- ^ Turner NJ (2009) Directed evolution drives the next generation of biocatalysts Nat. Chem. Biol. 5:567-73 [PMID: 19620998][DOI]
- ^ Zuker M (1991) Suboptimal sequence alignment in molecular biology. Alignment with error analysis J. Mol. Biol. 221:403-20 [PMID: 1920426]
- ^ Bachar O, Fischer D, Nussinov R & Wolfson H (1993) A computer vision based technique for 3-D sequence-independent structural comparison of proteins Protein Eng. 6:279-88 [PMID: 8506262]
- ^ Uliel S, Fliess A, Amir A & Unger R (1999) A simple algorithm for detecting circular permutations in proteins Bioinformatics 15:930-6 [PMID: 10743559]
- ^ Jung J & Lee B (2001) Circularly permuted proteins in the protein structure database Protein Sci. 10:1881-6 [PMID: 11514678][DOI]
- ^ Shatsky M, Nussinov R & Wolfson HJ (2004) A method for simultaneous alignment of multiple protein structures Proteins 56:143-56 [PMID: 15162494][DOI]
- ^ Weiner J, Thomas G & Bornberg-Bauer E (2005) Rapid motif-based prediction of circular permutations in multi-domain proteins Bioinformatics 21:932-7 [PMID: 15788783][DOI]
- ^ Lo WC & Lyu PC (2008) CPSARST: an efficient circular permutation search tool applied to the detection of novel protein structural relationships Genome Biol. 9:R11 [PMID: 18201387][DOI]
- ^ Schmidt-Goenner T, Guerler A, Kolbeck B & Knapp EW (2010) Circular permuted proteins in the universe of protein folds Proteins 78:1618-30 [PMID: 20112421][DOI]
- ^ Wang L, Wu LY, Wang Y, Zhang XS & Chen L (2010) SANA: an algorithm for sequential and non-sequential protein structure alignment Amino Acids 39:417-25 [PMID: 20127263][DOI]
- ^ Prlic A, Bliven S, Rose PW, Bluhm WF, Bizon C, Godzik A & Bourne PE (2010) Pre-calculated protein structure alignments at the RCSB PDB website Bioinformatics 26:2983-5 [PMID: 20937596][DOI]